Beretta ARX-160

Штурмовая винтовка Beretta ARX-160, приклад разложен и раздвинут до упора, установлен оптический прицел Trijicon ACOG.
Beretta ARX-160 assault rifle, early prototype (ca.2008)


Beretta ARX-160 assault rifle, production version (2013) in 5.56×45 NATO


Beretta ARX-160 assault rifle, production version (2013) in 7.62×39 M43 Russian


Beretta ARX-160 assault rifle, production version with GLX-160 grenade launcher


Beretta ARX-100 self-loading rifle for civilian use, in 7.62×39 Russian

Beretta ARX-160 assault rifle partially disassembled



Caliber: 5.56x45mm NATO, 7.62×39 M43
Action: Gas operated, rotating bolt
Overall length: 820-900 mm with 406 mm barrel and butt in ready position; 680 mm with butt folded
Barrel length: 305 mm / 12" or 406 mm / 16", quick changeable
Weight: ~ 3.1 kg with 406 mm barrel, w/o mag
Rate of fire: 700 rounds per minute
Magazine capacity: 30 rounds


The Beretta ARX-160 assault rifle is manufactured by famous Beretta company in Italy. Starting 2012, ARX-160 rifle is in use by Italian army. It is also offered for export, with initial customers being Special Forces of Algeria, Egypt and Kazakhstan (latter bought 7.62×39 version). A semi-automatic only version of the ARX-160 is offered for civilian sales as Beretta ARX-100 rifle, also in 5.56 / .223 Rem and 7.62×39.


The Beretta ARX-160 assault rifle is gas operated weapon that utilizes conventional piston-operated action, with short stroke gas piston located above the barrel. Barrel locking is achieved by more or less conventional rotary bolt. Unlike most other assault rifles, the Beretta ARX-160 assault rifle features quick-detachable barrels, which can be changed by operator in the field by depressing the barrel release button (located on right side of receiver, in front of magazine housing), pulling the barrel forward and out of the gun, and then inserting another (or same) barrel back. The receiver consists of two parts, upper (which holds barrel and bolt group) and lower (which hosts magazine housing, trigger unit and pistol grip). Both halves are made from impact-resistant polymer and connected using special quick-release locks, so there are no pins to push out (and lose). Another interesting and unusual feature of the Beretta ARX-160 assault rifle is that it has selectable left / right side ejection system with dual ejection ports (on either side of the gun) and user-switchable left / right position of cocking handle. To change the direction of empty case ejection, user has to push the cross-bolt button, located above and slightly to the rear of pistol grip, by the tip of the bullet (or other pointed item). This affects dual extractor-ejector claws, installed on the bolt, forcing them to eject spent cartridge to the desired side without any further disassembly of the gun or parts change. Charging handle, which is attached to the bolt carrier, also can be installed on either side of the gun. The Beretta ARX-160 assault rifle fires from closed bolt, in single shots and full automatic mode, and has ambidextrous safety / fire mode selector switch conveniently located above pistol grip. Upper receiver is fitted with full-length Picatinny type rail, made of aluminum, which can accommodate a wide variety of sighting equipment, including iron, telescopic, red-dot or electronic sights. Standard open sights are mounted on folding bases using rail interface. Additional lengths of Picatinny rail are installed on the forend on 3-, 6- and 9- o'clock positions. Lower (6-o'clock) position rail is strong enough to host GLX 160 40mm single-shot grenade launcher. Standard buttstock is also made of plastic, and folds to the right side. The buttstock is of telescoped, user-adjustable design.